Close

Get a quote today! Call: 0121 233 4409

  • Chemically etching thin gauge precision metal parts
  • Metal thickness ranges from .001″ to .080″ depending on the type of metal
  • Photo Etching Metals include many alloys of steel, copper, aluminum, molybdenum and more.
  • Alternative to stamping, punching, laser, water jet and wire EDM
  • Low cost tooling in one week
  • Part sizes from .020″ diameter to 24″ x 60″
  • Quantities from handfuls to 100,000s

Get a Quote

Photochemical machining provides a fast, flexible and relatively inexpensive way to produce a wide variety of precision metal parts. We can chemically etch many different types of metal, including specialty materials like molybdenum, soft magnetic alloys, and metal-clad ceramics, among others. Applications for photo-etched components range from mechanical, decorative, aerospace, etched pin badges, giftware, jewellry and scale models of railroads, villages etc.


Inexpensive tools in 1 week
Phototools replace conventional steel tools and dies. Phototools can be generated in a matter of hours from a customer-supplied CAD drawing or data file. Most tools can be rapidly and inexpensively regenerated to accommodate revisions to parts.

Complex designs are simple to produce
Photoetching has similarities to a printing process in that the part designs can be immensely intricate without having an impact on the tooling or production process. Precision metal etching can produce complex parts that would be either impossible or impractical to produce by stamping or laser cutting. Chemically etched parts are free of burrs and mechanical stress, and are pristinely clean and free of contaminants.

Raw materials are thoroughly cleaned before imaging; after etching, and after stripping and before and after any subsequent metal finishing processes.

Material Properties Unaltered
Photo etching imparts no mechanical or thermal stresses on metal substrates. Where stamping, punching and die-cutting impart shearing deformation and laser and water-jet cutting can leave ablative deformation, etching simply dissolves the unneeded metal, leaving a flat and burr-free part.

Tight, consistent tolerances
The phototool, which operates like a stencil, is the foundation of accuracy with light being its only working exposure, ensuring that there is no “tool wear” that needs to be monitored. Phototools are produced on a dimensionally stable mylar using an 8000-dpi photoplotter. The locational tolerances for part features typically meet the nominal dimensions of the specification.

Dimensional tolerances are a function of the thickness of the material. Typically, dimensions can be held to +/- 15% of the thickness of the material.

Ideal for Many Alloys and Gauges
Photo etching is suitable for a wide range of metal gauges. The practical range of thickness for ferrous and non-ferrous metals, and molybdenum, is .0001” to .065”.

Fast and Flexible
From initial tooling to finished parts, the entire photo etching cycle can be completed in 7 to 10 days. Given a normal backlog, typical lead times for new parts are 3-4 weeks. Often, repeat orders can be processed more quickly, especially if the raw material is in stock. Prototype orders may be done in 2 weeks. Additional time is required to accommodate secondary operations such as plating, forming, heat-treating, silk screening, assembly, or the addition of surface components.